Main Features:
*High-frequency switching technology for compact size and light weight
*Pure sine wave output (THD*High efficient DC-to-AC conversion minimizing energy loss
*N+X parallel redundancy framework design for future expansion
*“All master” dynamic mechanism eliminate single point failure to optimize reliability
*Low power “Power Saving Mode” to conserve energy for less than 15W
*High power density design
*Input/output isolated design for the maximum operation safety
*Intelligent cooling fan speed control determined by loads
*Comprehensive status LED indicators
*DSP Control
*Multiple protection: Input low voltage / Overload / Short circuit / Low battery alarm / Input over voltage / over temperature
*Wall-Mount design for flexible placement
Specification:
MODEL |
PST 600 |
Output Power (Continuous) |
600W |
Surge Rating |
1200W |
Nominal Input Voltage |
12Vdc |
Output Voltage |
110/115/120Vac, 220/230/240Vac |
Crest Factor |
3:01 |
Output Frequency |
50/60Hz ± 0.1% |
Efficiency(Typical) |
> 88% for 110/115/120Vac System ; > 90% for 220 230/240Vac System |
No Load Current Draw |
< 12W |
Stand-by Current Draw |
< 6W |
Output waveform |
Pure Sine Wave |
Total Harmonic Distortion |
< 3% with Linear Load |
Input Voltage Range |
10-15Vdc for 12V series |
Output Voltage Regulation |
110/115/120Vac, 220/230/240Vac ± 5% |
Protection |
Overload, Short circuits, Reverse polarity, Over/under input voltage, Over temperature |
Operating Temperature |
–20°C to 70°C ; –5°C to 40 °C with full performance |
EMC |
FCC Part 15, EN55022 Class B |
Communication Port |
RS232 serial port ( RJ11 type connector ) |
Dimensions (DxWxH)mm |
270 x 160 x 70 |
Weight |
2.5Kg
|