STCS6010 10G Core Switch Description: |
The STCS6010 is a 10Gigabit core routing switch that offers 10 service slots. With which you could install 2
|
10G modules, plus 8 full 24 port full gigabit switch ( The STCS5024 series) modules into. |
The STCS6010 10G multi-service core routing switch is a new-generation switch with high performance .
|
They are extensively applied in the core layer of E-government networks, Campus networks, Education
|
networks and Enterprise networks and core layer or aggregation layer of Carrier's IP MANs.
|
|
Based on 10G platform, it supports high-speed 10Gbps interface cards that provides interconnection
|
between MANs, Campus networks and Data centers to construct end-to-end Ethernet, featuring low cost,
|
high performance and reliability to support abundant services.
|
Furthermore, it provides L2 and L3 wire-speed packet forwarding and distributed MPLS wire-speed
|
forwarding by its high performance, high density and high reliability chassis architecture design. It also
|
provides rich service functions, such as powerful QoS guarantee, complete security management and high
|
reliability. All of these power features enables the STCS6010 to fully meet the requirements of high
|
capability, high reliability and multiple services networks.
|
STCS6010 switch supports the functions of strategy routing, IPV6, MPLS, load balancing and so on.
|
With extended multi-service 10G or full gigabit switching cards, the STCS6010 flexibly meets different |
application requirements for any complicated network environments. |
|
|
>>> Advanced system structure: |
The distribution structure design is adopted for STCS6010 10G core switch, powerful ASIC chip is applied |
in each interface card to provide distribution packet forwarding; Crossbar technology is adopted for cross |
interface cards that is with high speed packet forwarding capability. Which greatly improve throughput |
and expansion capabilities of the routing switch. With built in main control board, you don't need to purchase |
extra equipment slots, Crossbar switching fabric provides switching capacity upto 384G and can be set to |
work in either active or standby modes. The longest path matches (LPM) layer 3 switching technology. |
|
>>> High switching capacity, high density wire-speed switching |
Providing backplane bandwidth of 2.4Tbps, switching capacity of 864gbps and throughput of 643Mpps. |
High-density interface cards of the switch enables it supports wire-speed forwarding. In addition, when the |
switch works under wire-speed forwarding mode, it supports different high-density interface cards and |
combined interface cards to meet the core layer's requirements for high density and high throughput. |
|
>>> 10G interface |
10G Ethernet interface card provides richer bandwidth and powerful processing capabilities while preserve |
the compatibility and easy upgrading. Meanwhile, 10G Ethernet provides pertinent solutions for MAN and |
WAN applications to simplify the network architecture and reduce the TCO (Total Cost of Ownership). |
|
>>> Supports IP V4/IP V6 |
Supports IP V6: ICMPV6, OSPFV3 (for IPV6), RIPng, MLDV1/V2, ISATAP, 6 TO 4 Tunnels, configured |
Tunnels and so on. |
|
>>> Support L2 VPN (QINQ) |
STCS6010 switch supports carrier grade VLan (Double Tagging,VLAN tunnel).To implement the Ethernet |
L2VPN, the core switch allows a second tag over the switching data. Outer tag is used for create VPN and |
provides linking options, while inner tag is used for tagging VLAN information.This feature implements |
Security Control of data transfer which any traditional ethernet application don't include. |
|
>>> Comprehensive routing protocol support |
STCS6010 series 10GE Core Routing switch supports a rich set of routing technology which covers almostly
|
all the existing routing features.
|
> Supports unicast routing protocols:RIP V1,RIP V2,OSPF, BGP, static routing;
|
> Supports multicast routing protocols:IGMP,PIM-SM;
|
> Supports redundancy backup protocol:VRRP.
|
|
>>> Flexible QoS
|
Support for flexible queue scheduling algorithms,Strict Priority (SP),Weighted Round Robin(WRR),
|
and SP+WRR;8 priority queues.
|
Support for intelligent Layer 2-7 flow classification;
|
Support for IEEE 802.1p 、TOS、and DiffServ Code Point.
|
|
>>> Rich multicast feature
|
It supports dynamic unicast/multicast routing protocols,fits different scales of networks structure;
|
It supports loop detection of IGMP source port and source IP, can efficiently avoid any illegal multicast source
|
and implements high-security of network.
|
|
>>> Diversified management modes
|
STCS6010 core switch support Simple Network Management Protocol (SNMP),it supports Command Line
|
Interface (CLI),Web management, and TELNET, which greatly simplify its network management. |
|
|
>>> Specifications: |
|
|
|
Protocol
|
IEEE 802.1D, IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, |
IEEE 802.1Q, IEEE 802.1p, GMRP, GVRP, PIM-SM, IGMP, IEEE 02.1D/1w/1s, |
OSPF, RIP1/2 Jumbo Frame (9Kbytes), QinQ, ICMPV6, OSPFV3(for IPV6), |
RIPng, MLDV1/V2, ISATAP, 6 TO 4 Tunnels, configured Tunnels
|
Backplane Bandwidth
|
≥2.4Tbps
|
Switching Capacity
|
≥864Gbps
|
Packet Forwarding Rate
|
≥643Mpps
|
Module slots
|
10 (Two are used for managed engine module)
|
LPU slots
|
8
|
MAC Table
|
128K
|
VLAN Table
|
4K
|
Port Aggregation
|
Support 802.3ad ,6 trunks, 8 ports in each trunk
|
STP/RSTP
|
Support IEEE 802.3D / 802.1w/802.1s
|
Mirror
|
Support
|
SUPER VLAN
|
Support
|
DHCP
|
Support DHCP Relay |
Support DHCP Server
|
802.1x
|
Support
|
Web Portal
|
Support
|
VRRP
|
Support
|
Defeat DoS Attack
|
Support
|
Management protocol
|
SNMPv1/v2c/v3, Web(JAVA), CLI(Telnet /Console), RMON(1,2,3,9), |
cluster management, SSH, SNTP, Syslog
|
Environment
|
|
Operation temperature
|
-20~50 ℃
|
Storage temperature
|
-40~70 ℃
|
Humidity
|
10% - 90% RH
|
Power supply
|
AC:100V~240V, 47~63Hz |
DC:-60V~-48V
|
Dimension
|
436mmX438mmX906mm
|
Weight(Kg)
|
<40Kg
|
Power
|
<240W
|
|
|
>>> Order Information: |
|
Quantity
|
Remark
|
> STCS6010 Core Switch Chassis with fan |
1 |
Mandatory |
> Main control Board |
Main Control Unit with Switching Fabric |
1-2
|
Mandatory |
> Interface Modules : |
24-port 10/100/1000BASE-T module
|
0-8 |
Optional |
24-port 1000BASE-X (SFP) module
|
0-8 |
Optional |
2-port 10G Interface Module, XFP Req. (Standard)
|
0-8 |
Optional |
> Power Supply Configuration |
AC P/S 90-264V
|
1-2 |
Optional |
DC P/S 36-75V
|
1-2 |
Optional |
|