HPE J9842A - Skip to the beginning of the images gallery Name: J9842A Model: J9842A - HP 517 Access Point Detail: HP 517 802.11ac (WW) Unified Walljack
J9842A is a HPE 517 Single Radio 802.11ac (WW) Unified Wired-WLAN Walljack. The HPE 517 802.11ac Unified Walljack is a single radio-dual band unified wired-wireless access point and Gigabit Ethernet switch that works in sync with HPE MSM controllers, delivers high-performance networking solutions. The enhanced controller architecture scales to IEEE 802.11ac—without requiring a controller replacement. The controllers provide advanced radio resource management (RRM).
J9842A Specification
J9842A Specifications
Type
HPE 517 Single Radio 802.11ac (WW) Unified Wired-WLAN Walljack
Ports
· 4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
· 1 RJ-45 pass through port
AP characteristics
Radios (built-in): 802.11a/b/g/n/ac
Radio operation modes: Client access, Packet capture
AP operation modes: Controlled
Wi-Fi Alliance: a/b/g/n/ac Wi-Fi Certified
Antenna: Internal omnidirectional antenna
Number of internal antennas: 3
Dimensions
3.54(w) x 1.5(d) x 6.1(h) in (9 x 3.8 x 15.49 cm)
Weight
0.73 lb (0.33 kg)
Mounting and enclosure
Indoor; Designed for mounting in a standard wall outlet box or on optional Flush Mount / Desktop Mount kit.
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative humidity
5% to 95%,
noncondensing Non-operating/ Storage temperature
-4°F to 158°F (-20°C to 70°C)
Non-operating/ Storage relative humidity
5% to 95%, noncondensing
Electrical characteristics
Description: Powered Device (PD): The device will be powered by any standard IEEE 802.3af PoE source. To provide PoE output, the unit must be powered via IEEE 802.3at PoE+ or via local power.
FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; EN 301-489-1; EN 301-489-17; ARIB STD-T66; RSS-Gen (Canada); OFTA (Hong Kong); DSPR (Japan); IDA Registration (Singapore); MIC approval (Korea); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1
Medical
EN60601-1-2
RF Exposure
FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.
Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11ac WLAN Enhancements for Very High Throughput
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
HP 417 Single Radio 802.11n (WW) Unified Wired-WLAN Walljack
HPE 517 Single Radio 802.11ac (WW) Unified Wired-WLAN Walljack
Ports
· 1 RJ-45 auto-negotiating 10/100/1000 PoE port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
· 2 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
· 1 RJ-45 autosensing 10/100 PoE port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3af PoE); Duplex: half or full
· 1 RJ-45 pass through port
· 4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
· 1 RJ-45 pass through port
AP characteristics
Radios (built-in): 802.11b/g/n
Radio operation modes: Client access, Packet capture
AP operation modes: Controlled
Wi-Fi Alliance: b/g/n Wi-Fi Certified
Antenna: Internal omnidirectional antenna
Number of internal antennas: 2
Radios (built-in): 802.11a/b/g/n/ac
Radio operation modes: Client access, Packet capture