| STE-226--X3X1 24X2G Layer 2 managed Optic Switch Description: |
|
The STE-226-X3X1 is a Layer 2 managed optic fiber switch that offers 24 port 10/100Base-Fx, plus 2 port
|
| 10/100/1000Baes-Tx. It transfers gigabit ethernet copper to 10/100mbps fiber which eables extends the |
| network up to 60km..It supports port mirroring and port bandwidth control. Administrator can monitor the |
| real-time connectivity status of each port through its Web-based Interface. |
| |
| STE-226-X3X1 supports Port VLAN of up to 24 groups and Port Trunking of up to 2 groups, QoS, Static MAC |
| Address Table, port security, and broadcast storm control, Loop detection, RMON MIB (Group 1,2,3,9), IEEE |
| 802.1Q VLAN, IGMP Snooping, etc. It offers easy-to-use management Interface and it fits small and medium |
| size enterprise, net cafe and smart residential areas network configurations. |
| |
| >>> Features: |
| > Fully compatible with IEEE802.3 10BASE-T Ethernet , IEEE802.3u 100BASE-TX /Fx Fast-Ethernet , |
| IEEE802.3ab 1000BASE-T 1000M-Ethernet IEEE802.3x |
| > Basic setting function of each port: 10/100Mbps Auto-Negotiation mode setting, Full/Half duplex mode |
| setting, 802.3x back pressure flow control setting, port status indicating |
| > Port Mirroring: To monitor more than one port at the same time, supports port monitoring receiving, port |
| monitoring sending and port monitoring of receiving and sending modes, supports monitoring across |
| different VLANs |
| > Port Bandwidth Control: support 8 different levels of port bandwidth control |
| > VLAN: supports port-based VLAN to divide different VLAN groups |
| > Port Trunking: Supports Port Trunking of 2 groups, 2/4 ports per group, support fault tolerant and hot |
| backup of the cascade connection pipeline |
| > Priority setting: Supports static priority and IEEE802.1p class of service with level 2 priority mode |
| > MAC Address Filtering: MAC address learning control, filtering of fixed MAC address |
| > Broadcast storm control: broadcast storm configuration |
| > Backup: Support the backup and recovery of the configuration of the switch |
| > Firmware upgrade: Support firmware upgrade via TFTP |
| > Easy-to-use operation guide: offer simplified and simple description of function, operating guide, |
| help user to fast plug and play |
| > Auto-Negotiation on each port senses the link speed of a network device (either10, 100Mbps) and |
| intelligently adjusts for compatibility and optimal performance |
| > Internal high frequency power switching, ensure stable and reliable operating |
| > Supports the port N-Way auto-negotiation function, automatically negotiate the speed and duplex mode |
| between two devices. |
| > Provides RMT management |
| > Standard 19-inch rack-mountable steel case, 1U height |
| |
| >>> Specifications: |
| |
|
Standard/Protocols Supported
|
IEEE 802.3, 802.3u, 802.3x
|
|
Ports
|
24 10/100M auto detect RJ45 ports( Auto MDI/MDIX) |
| 1 10/100Base-FX port |
|
Transmission Media
|
> 10BASE-T: Category 3,4 or 5 UTP/STP (Max:100m) |
| EIA/TIA- 568 100 Ω STP (Max:100m) |
| > 100BASE-TX: 2pairs of category 5 UTP (Max:100m) |
| EIA/TIA- 568 100 Ω STP (Max:100m) |
| > 100Base-Fx: MMF (maximum 2000m) , SMF (maximum 20~60Km) |
| > 1000BASE-TX: Category 5 UTP/STP (Max:100m) |
|
Forward Mode
|
Store and forward
|
|
LED Indicator
|
Link/Act for each port, Power
|
|
Dimensions (W x D x H)
|
180mm x 40mm x 44mm
|
|
Working Environment
|
Working temperature:0oC ～ 40oC |
| Store temperature:-40oC ～ 70oC; |
| Working humidity :10% ～ 90% RH Non-condensing |
| Storage Temperature:5% ～ 90% RH Non-condensing |
|
Power Supply and consumption
|
AC110~220V |
|
Max Power Consumption: 15W
|
|
Dự Án 0932096866
Giám đóc KD Dự án: 0944869599
Phân phối Dự Án: 083467.8989
Chương trình Khuyến mại Quý 3 năm 2022
Khuyến mại 30.6.2019 - 30.7.2019
Hướng dẫn sử dụng UPS ZLPOWER 1000VA
Sản phẩm cùng loại 
