| Product Name: | MINI LW Pure Sine Wave Inverter | 
| Mode No. : | Mini LW 500-1000W | 
| Classification: | Low frequency Inverter | 
| Introduction: | All kinds of home/office appliances, solar power system and other equipments which use single phase power. | 
 
Main Features:
 
*LED/LCD digital display show voltage, load and battery info in real time.
*Peak power is three times of rated power.
*Can work with inductive load such as air conditioner, motor door and so on.
*Pure sine wave output, available for sensitive load.
*4-step progressive charging, 7 battery type selector.
*Fast and powerful charger with 20A and 35A.
*Accept generator’s energy output.
*High power factor 0.9, low power consumption.
*Automatically transfer between battery and line modes.
*Microprocessor control guarantees high reliability.
*Bypass without battery connected.
*Remote control function.                                                                                                                                                     
*Protection against: Over load, over temperature, over charging, low battery
*Reverse connection (optional by hard connector), Blackouts
 
Specifications:
| MODEL | LW-500 | LW-750 | LW-1000 | 
| Nominal Power | 500W | 750W | 1000W | 
| AC Input | 
| Phase & waveform | Single phase & Pure Sine Wave | 
| Voltage | 110/120/130VAC or 220/230/240VAC | 
| Acceptable Voltage |    95-126VAC or 194-253VAC±4% | 
| Low Line Disconnect | 85VAC±4% or 184VAC±4% | 
| Low Line Re-connect | 95VAC±4% or 194VAC±4% | 
| High Line Disconnect | 136VAC±4% or 263VAC±4% | 
| High Line Re-connect | 126VAC±4% or 253VAC±4% | 
| Frequency | 50Hz:41-54Hz  60Hz:51-64Hz | 
| AC Output | 
| Phase & waveform | Single phase & Pure Sine Wave (bypass mode sync to input) | 
| Voltage | 110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input) | 
| Frequency | 50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input) | 
| Peak Power | 3 times of rating power | 
| Short Circuit Protection | Yes, shutdown after 10ms | 
| Power Factor | 0.9-1.0 | 
| DC Input | 
| Battery Voltage | 12VDC or 24VDC | 
| Minimum Start Voltage | 10VDC or 20VDC | 
| Low Battery Alarm | 10.5±0.3vdc or 21±0.6vdc | 
| Low DC input Shut-down | 10±0.3vdc or 20±0.6vdc | 
| High DC input Alarm & Fault | 16±0.3vdc or 32±0.6vdc | 
| High DC input Recovery | 15.5±0.3vdc or 31±0.6vdc | 
| MAX Charger Current | 20A/35A (According to the Inverter model) | 
| System parameter | 
| Battery Mode Efficiency  | >85% | 
| Line Mode Efficiency  | >96% | 
| power saver | Load  | 
| Audible Alarm | Sounding when the heat sink’s tem is over 100℃ and shutdown after 30 seconds. | 
| Over Load Protection | 110%
Load>150%, beeps 0.5s every 1s, and Fault after 20s. | 
| Protections | low battery、over charging、over temp、over load | 
| Communications | RS-232/USB/SNMP(custom-made) | 
| Operating Environment | 0-40℃,0-90%RH(non-condensing) | 
| Audible Noise |  | 
| Net Weight(KG) | 8.5kg | 11kg | 14.5kg | 
| Dimension L X W X H | 380 X182 X160mm |