| STE-2224-GW 24 Port Gigabit Websmart Switch Description: |
|
The STE-2224-GW is a Websmart gigabit switch that provides 24 Port 10/100/1000Base-Tx
|
| Auto-Negotiation and Auto MDI/MDIX, together with 2 gigabit SFP slots combo with 23 and 24 gigabit TX |
| ports, with which it enabes users extend network from up to 80Km. |
| The 24 port gigabit switch offers Web management and smart configurations features , such as Port |
| Mirroring, port bandwidth distribution control,Port /Tag Based Vlan,Trunk and static MAC address,QOS, |
| Port safty, port flow stat,etc. |
| Providing a backplane of up to 48Gbps, the STE-2224-GW offers non-blocking wire-speed forwarding. |
| The 24 port gigabit websmart switch adopts store-and-forward switching method and it integrates an 8K |
| MAC address table to fully meet diversified applications . |
| With a 19 inch rack mountable design, the STE-2216-GW can be an ideal option for Internet cafes, |
| medium/small enterprises and intelligent community network. |
| |
| >>> Features: |
| > Fully compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z |
| > 24 10/100/ 1000M RJ45 Ports with NWAY and Auto MDI/MDI-X |
| > 2 Combo Gigabit SFP slots, Auto-Negotiation between cooper ports and optical slots |
| > Support IEE802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode |
| > Backplane bandwidth up to 48 Gbps, support Non-blocking Full Wire-Speed throughput |
| > Store and forward architecture, 8K MAC Address Table |
| > Support Port-based VLAN of up to 24 groups, IEE802.1q, Tag-based VLAN, VLAN ID from 1-4094 |
| > Support Port Trunking of up to 4 groups, each group includes up to 4 ports |
| > Static MAC Address Table management supported |
| > Port bandwidth control, 64kbps |
| > QoS (Quality of Service ), 4 IEEE 802.1P Priority Queues |
| > Supports the cable diagnosis |
| > Supports data statistics |
| > Port Security Control, support Port MAC address aging, learning, 128 MAC Addresses bingding per port |
| > Broadcast Strom Intelligent Control, broadcast type control, broadcast setting supported |
| > Port Mirroring |
| > Support IP address setting of Fixed IP or DHCP client automatic distributing |
| > Web-Managed, Multi-Language Supported |
| > Support Firmware upgrade based on HTTP |
| > Cable diagnose |
| > Support Flow Static, dynamic display packet storing , filtering and transferring of port and switch |
| > Internal power supply, Standard 19-inch rack-mountable Metal Case, I U height |
| |
| |
| >>> Specifications: |
| |
| Standard |
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, |
|
IEEE802.3x, IEEE802.1q, IEEE802.1p
|
| IP address |
> IP address for login: 192.168.0.1; Username: admin ; Password: admin ; |
| > Please make sure the switch is working normally and then press the RESET button |
| until the status of the SYS indicator changes in this way: Always ON - Flashing off. |
| At this time, you can release this button, and the Switch will restore the factory default |
| settings automatically. When the SYS indicator lights green again, this indicates you |
| have succeeded in restoring default settings. |
| Ports |
24 10/100/ 1000M RJ45 Ports with NWAY and Auto MDI/MDI-X |
| 2 Combo Gigabit SFP slots |
| Backplane |
48Gbps |
| MAC address |
8K |
| Switching mode |
Store-and-Forward |
| Flow control mode |
IEEE 802.3x full-duplex flow control and back pressure flow control |
| LED Indicator |
10/100/ 1000M Port: 1 LINK/ACT, 1 1000M (Speed), 1 100M (Speed)
|
| SFP slot: 1 LINK/ACT, 1 1000M (Speed, shared with RJ45 port) |
| Power: 1 |
| SYS: 1 |
| RESET: 1 |
| Network Cable |
> 10Base-T: UTP category 3, 4,5 cable up to 100m |
| > 100Base-TX: UTP category 5 cable up to 100m |
| > 1000Base-Tx: 1000Base-Tx: CAT 5 UTP is recommended |
| > 1000Base-SX: 62.5um /50um LC, MMF, Max 220/550 meters (721/1804 feet) |
| > 1000Base-LX: 62.5um /50um LC, MMF, Max 550 meters (1804 feet) |
| > 1000Base-LX: 9 um /10um LC, SMF, Max 3Km-8Km (1.86 miles-49.7 miles) |
| Dimension |
440mm X 140mm X 44mm |
| 19 inch Rack mountable, 1U height |
| Power Supply |
Internal Power: AC 160-260V 50/60Hz |
| Wide range voltage input |
| Consumption:45 Watts Max |
| Temperature Humidity |
|
Temperature
|
Humidity
|
| Operation |
0℃ to 40℃
|
10% to 90%
|
| Storage |
-40℃ to 70℃
|
5% to 90% RH
|
|