SOLAR INVERT  ZLPOWER
 

Main Features
1. GS Series AC/Solar charging Off grid Hybrid Inverter.
2. LED/LCD display, Enhanced functions setting via LCD. 
3. Man-machine intelligent design.
4. Built-in 40A/60A optional MPPT solar charger controller.
5. LCD shows the solar power capacity.
6. 5 stages adjustable AC charging current. AC charging also can be closed. 
7. AC/DC priority modes can be set.
8. Generator restart signal. (Dry contact).
9. 3 times peak power. Strong loading capacity.
10. Overload, output short-circuit protection...... 
 
| Model | GS4000W | GS5000W | GS6000W | 
| ACInput
 | Nominal Power | 4000W | 5000W | 6000W | 
| Input Voltage Waveform | Sinusoidal (utility or generator) | 
| Nominal input Voltage | 120/230VAC | 
| Low Line  Disconnect | 85Vac±4%(Normal) or 80Vac±4% (Wide) for 120V184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V
 | 
| High Line  Disconnect | 136Vac±4%(Normal) or 140Vac±4%(Wide) for 120V263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V
 | 
| Max AC input Voltage | 120V for Max150Vac, 230V for Max270Vac | 
| Frequency | 50Hz:41-54Hz, 60Hz:51-64Hz | 
| ACoutput
 | Output Voltage Waveform | Sine wave | 
| Power Factor | 0.9~1.0 | 
| Nominal Output Voltage (V) | LV:120Vac ±10%rms, HV:230Vac ±10%rms | 
| Nominal Output Frequency   (Hz)
 | 50Hz ± 0.3Hz, 60Hz ± 0.3Hz | 
| Solarcharger
 | Rated Charge Current |  60A | 
| PV Input Voltage range | 30VDC-55VDC for 24VDC, 60-110VDC for 48V | 
| Max.PV open circuit array voltage
 | 24V for 55Vdc, 48V for 110Vdc    | 
| Charger  mode | MPPT | 
| PV Low Voltage Re-connect
 | PV≥Bat.V+3V | 
| PV Low  Voltage Disconnect
 | PV≦Bat.V | 
| Efficiency | ≥97% | 
| ACCharger
 | Nominal Charger Current
 | 35A/50A/70A(According to the inverter model) | 
| 5 stages adjustable charging current | 
| Over charge Protection |  Bat.V≥31.0VDC for 24V battery, Bat.V≥62.0VDC for 48Vbattery beeps 0.5s every 1s & fault after 60s
 | 
| Efficiency | Efficiency(Battery Mode) | ≥87% | 
| Efficiency (Line Mode) | >98% | 
| BatteryVoltage
 | Nominal DC input Voltage | 24/48VDC | 
| Low Battery Alarm | 21VDC±0.6VDC  for  24VDC | 
| 42VDC±1.2VDC  for  48VDC | 
| High DC input Alarm & Fault
 | 32VDC±0.6VDC  for  24VDC | 
| 64VDC±1.2VDC  for  48VDC | 
|  | Transfer Time | 20ms(max) | 
| SystemParameter
 | Over-Load Protection | 110%<load<150%,beeps 0.5s every 1s,and Fault after 60s off the output,load>150%,beeps 0.5s every 1s,and Fault after 20s
 | 
| Output Short Circuit Protection
 | Current  limit (Fault after 10s) | 
| Surge Rating(10s) | 1:3(VA) | 
| Power Saver | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | 
| Protections | Low battery,  over charging,  over load,  over temp | 
| GeneralSpecifications
 
 
 | Operating Temperature Range | 0℃~40℃ | 
| Storage Temperature | ﹣15℃~60℃ | 
| Operation humidity | 5% to 95%(non-condensing) | 
| Audible Noise | 60dB max | 
| cooling | Forced  air, variable speed  fan | 
| Dimension(L*W*H) | 530*400*190mm | 
| Net Weight(kg) | 30.8 | 36 | 37 | 
Product specifications are subject to change without further notice,the form is only for reference,please make the specific parameters as the standard.