Wire Speed L2 Switching: |
Switching Mode: |
> Wire Speed Forwarding on all ports |
> Store and Forward |
> Switching Capacity: 1 Gbps - 1.2 Gbps |
|
> 148,880 pps for 100 Mbps |
VLAN: |
> 14,880 pps for 10 Mbps |
> Port based VLAN |
> Auto negotiation of port speed |
> User port tag-insertion and removal |
|
> Supports long frames of up to 1536 bytes |
Broadcast Storm Suppression: |
> Fiber optic port VLAN trunking |
> Bandwidth Rate control on Broadcast, Multicast |
> 4094 Port speed 802.1Q VLAN |
and Flooding on all ports |
> IEEE 802.1 double-tagged VLAN |
> Broadcast, Unicast & Multicast traffic suppression |
|
|
|
MAC Address Table: |
STP ( Spanning Tree protocol ): |
> MAC Address self learning |
> Supports Spanning Tree Protocol |
> IEEE 802.1D standard(STP) |
> IEEE 802.1D STP |
> Up to 2k MAC addresses |
|
> Aging |
Flow Control: |
|
> IEEE 802.3x flow control (full duplex) |
Download and upgrade: |
> Back pressure based flow control (half duplex) |
> Supports TFTP to implement upgrade |
|
|
|
Management: |
|
> Command Line Interface |
|
> Remote Configuration through Telnet |
|
> Configuration through the Console port |
|
> Simple Network Management Protocol (SNMP) |
|
> Logic Eastern Network management System (LENS) |
|
> Integrated Auto Discovery |
|
> Comprehensive set of Statistical counters for traffic analysis |
> 2 hours and 24 hours history of Performance Counters |
|
|
|
Maintenance: |
IGMP: |
> Supports PING |
> V1 & V2 snooping |
> Supports remote maintenance through Telnet
|
|
|
|
Security: |
|
> Hierarchical User Management and password protection
|
|
|
Hardware Features: |
|
> STE-332-X3X1: 3 Port 10/100Base-Fx + 2 Port 10/100Base-Tx |
> 10/100M auto-negotiation, maximum speed to 20/200M (full-duplex) |
> Automatic MDI/MDI-X configuration |
|
> LED status of Link, activity, Full/half duplex, speed,and power on diagnostic function |
> Steel case |
|
|
|
Specification: |
|
|
|
Protocol
|
CSMA/CD
|
Standard
|
IEEE802.3 10BASE-T,IEEE802.3u, 100BASE-TX/FX, IEEE802.3x
|
Topology
|
STAR Topology
|
Number of Ports
|
2 or 5 Port copper + 3 port fiber, 10/100mbps
|
Uplink Ports
|
None
|
Transmission Rate
|
10Mbps: 14880pps, 100Mbps:148800pps
|
Switching mode
|
Store and Forward
|
Flow control mode
|
IEEE 802.3x full-duplex flow control and back pressure flow control
|
LED Indicator
|
LED status of Link, activity, Full/half duplex, speed, and power on diagnostic function
|
Cable Support
|
10Base-T: 3, 4 or Cat 5 shielded / unshielded twisted pair, 100 meters max.,
|
100Base-TX: Cat 5 shielded / unshielded twisted pair, 100 meters max.
|
100Base-Fx: 8.3μm, 8.7μm, 9μm and10μm on single mode fiber and 50, 62.5 and 100μm on multi-mode fiber
|
Fiber Cables/Connectors
|
Single Mode/Multi Mode fiber cable
|
SC,ST,LC connector optional
|
Power supply
|
AC:220V or DC:-48V
|
Temperature Humidity
|
|
Temperature
|
Humidity
|
Operation
|
-20 ℃ to 70 ℃
|
10% to 90%
|
Storage
|
-40 ℃ to 75 ℃
|
5% to 95% RH
|
|
|