Chương trình Khuyến mại Quý 3 năm 2022
Khuyến mại 30.6.2019 - 30.7.2019
Hướng dẫn sử dụng UPS ZLPOWER 1000VA
RA series High frequency outdoor UPS is used In suburban district, remote road or mountain, severe environment such as areas with high temperature(-40℃), severe dust, moisture, rain, mist erosion, poor grid power quality(voltage durative higher than 260V or less than 160V, Frequency abnormal change)
Features:
♦Provides a pure uninterrupted AC sine wave power supply for the outdoor communication / network equipment.
♦The use of high temperature, anti cold, salt spray, anti-corrosion, anti dust, waterproof, lightning protection design.
♦Advanced MCU micro processor control Technology, ensure long life reliability.
♦Excellent Protection against over voltage, overload, over current, overcharge and so on.
♦Strong anti-jamming capacity, Lightning, surge, short-circuit, network/fax/modem surge protection. Input L and N lines reverse wiring detection.
♦DC start function, input RFC reuses function.
♦Humanized bypass output adjustable.
♦Available to work with generators.
♦RS232 intelligent communication monitoring.
♦AS-400 Dry contact and SNMP cars remote intelligent control.
Specifications:
| Model | RA6KL | RA10KL | ||
| Capacity | VA/W | 6000VA / 4800W | 10000VA / 8000W | |
| Input | Nominal Voltage | 110/115/120 VAC or 200/220/230/240 VAC 200/208/220/230/240 VAC | ||
| Voltage Range | 125～275VAC | |||
| Power Factor | ≥ 0.97 | |||
| Frequency Range | 50Hz: 46~54Hz; 60Hz: 56~64Hz | |||
| Output | Voltage | 200/208/220/230/240 (1± 1%) VAC | ||
| Frequency |
50/60Hz (Adjustable); 60Hz AC Mode: Follow AC Mode (AC Range 56~64Hz); Battery Mode: 60Hz (1± 0.2%) |
|||
| Wave Form | Pure sine wave | |||
| Power Factor | 0.8 | |||
| Harmonic Distortion | ≤ 2% THD (Linear load) ≤ 6% THD (Non-Linear load) |
|||
| Overload Capacity | Load ＜105% work consistant; 105%＜load ＜125% 1min; 125%＜load ＜135% 30sec;＞135% 0.5sec |
|||
| Current Crest Ratio | 3:1 | |||
| Connections | Terminal block | |||
| Efficiency | Battery Mode | 87% | ||
| AC Mode | 88% | |||
| Battery | Type | Sealed free maintenance lead acid battery | ||
| Nominal DC voltage | 192VDC | 192VDC | ||
| Stansard Battery Cabinet | 16*38AH | 16*38AH | ||
| Backup Time (Full Load) |
Depens on the capacity of internal battery bank (24AH, 38AH optional) |
|||
| Charge Current (Max) | 2.0A | 2.0A | ||
| Charge Voltage (VDC) | 219.5V ±1.1%VDC | 219.5V ±1.1%VDC | ||
| Recharge Time | Depends on the capacity of internal battery bank | |||
| Bypass | Automatic Transfer | On overload and UPS failure | ||
| Before UPS Power-on | YES | |||
| Transfer Time | 0 ms (from imain to battery and vice versa); Less than 4ms from inverter to bypass and vice versa | |||
| indicators | LCD Display | UPS status, Battery capacity, loading, Fault code (LCD: I/P ＆O/P voltage＆frequency, Battery voltage) | ||
| Audible | Bypass, Battery mode, Battery low, Overload, Fault | |||
| Communications | Intelligent RS232 serial port | Software support Windows family software, Linux, Sun network operating system, IBM Aix, Compaq True64 SGI IRIX, FreeBSD, HP-UX and MAC | ||
| SNMP (Optional) | Remote control UPS through SNMP management and Internet | |||
| USB (Optional) | Windows family software and Mac OS | |||
| Environmental | Operating Temperature | 0 ~ 40℃ | ||
| Operating Humidity | 0～95% (No condensing) | |||
| UPS dimension | L*W*H (mm)(UPS main body) | 632*482*133.4 | 632*482*133.4 | |
| L*W*H (mm)(Cabinet) | 718*595*1371 | 718*595*1371 | ||
| Weight (kg) |
Net Weight ( No battery) |
120.00 | 123.00 | |
Sản phẩm cùng loại 
